How To Install Window Blinds In St. George

Many St. George homeowners opt for window blinds when they want more privacy and governance over daylight in their properties. They’re a practical and economical window covering. Experienced do-it-yourselfers could also secure them in a handful of steps. But, nothing beats the ease of hiring a professional window treatment installer. Here are the essential steps of putting up window blinds and when to phone the experts to handle it for you.

Measure And Mark Everything Exactly

Prior to beginning, decide if you should get inside-mount blinds or outside-mount. This vital bit of info will help you see where to measure. Get measurements of the height, depth, and width on the inside of your window frame for inside-mount blinds. When attaching outside-mount blinds, mark the height and width of your window, including the trim, and then lengthen your measurements by three inches to make sure you have proper coverage. Measure exactly–refrain from rounding up or down. Poorly fitting blinds will not function correctly.

Shop For Blinds

Once you know your measurements, you may choose your blinds. You probably know what style of blinds you would like. Get blinds that are as even with your measurements as possible. Off-the-shelf blinds often won’t fit exactly, either sticking out too much or not reaching the end of the window entirely. Ensure you get hardware that lets your blinds attach at the right depth, too. You’ll need to go with custom-made blinds for the best fit.

Install Your Window Blinds

Your blinds should come with instructions. Follow them to install your specific product. If you would like a sample of how difficult it is to install window blinds in St. George, here are some common steps to offer a better idea.

 

Inside Mount Blinds

 

1. Affix a bracket on the top of the inside of the window approximately an inch from the edge. Ensure this spot won’t obstruct the blind’s function. Utilize a pencil to indicate the bracket holes.
2. Drill pilot holes in the proper spots.
3. Line up the bracket over your holes and secure with screws.
4. Redo the first three steps for the other bracket.
5. Snap the end caps onto the top rail of your blinds. Position the top rail into the brackets.

Attach the tilt wand and check it. Additionally, try out the pull cord.

Outside Mount Blinds

1. Determine if you’re installing on the window trim or wall above the window. Hold the headrail in place and make certain the blind covers the bottom of the window.
2. Mark the ends of the headrail.
3. Measure four inches from both headrail marks and mark your bracket holes here.
4. Drill pilot holes as indicated.
5. Align the bracket openings with your wall holes and fasten with screws.
6. Position the headrail into the brackets.

Attach the tilt wand and test to ensure everything works.

Pick The Easiest Way To Install Blinds 

As you know, you don’t need to do blinds on your own. The simplest way to install window blinds in St. George is to employ a professional window treatment installer. They will guide you at every step. They’ll help you find blinds that meet your needs, make precise measurements for a custom-made product, and put them up for you. They do this each day, so they’ll handle your job efficiently and correctly. They’ll know how to remedy any issues without taking hours searching for help on the Internet. A window treatment expert will also offer better-quality blinds than online or box stores.

Save Yourself The Trouble And Ask Sunburst Shutters To Install Your Window Blinds In St. George

Getting new window blinds in St. George couldn’t be simpler when you work with Sunburst Shutters St. George. We’ll help you select custom blinds that will match your windows precisely, and our expert installation team will put them up for you. All you must do is contact 435-485-9332 or fill out the form below to request a complimentary in-home consultation.